30
Setup menu
Language: allows you to select a language for the onscreen display.
Custom Key: allows you to assign a different function to the Custom but-
ton, allowing you to quickly and easily use the effect. Highlight an effect
and press Select to choose a different one.
• Blank Screen: displays an empty screen.
• Mute: turns off all sound.
• Aspect Ratio: toggles among 4:3, 16:9, and Native (see page 12 and
page 28).
• Source: cycles through available sources.
• Auto Image: resets the projector to the source (page 24).
• Freeze Screen: pauses the projected image.
• Source Info: the default effect. It opens a window with projector and
source information.
• Projector Info: opens a window with projector information.
• Overscan: removes noise around the image.
• Closed Captions: cycles through caption options.
AC Power On: When this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Auto Off Time: automatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Screen Save Time: automatically blanks the screen with a black color after
no signals are detected for a preset number of minutes. The image returns
when an active source is detected or a remote or keypad button is pressed.
Lamp Low Power: toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter.
Power Sounds: Controls whether the projector makes a sound when pow-
ered on and off.
Auto Source: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this fea-
ture is Off, the projector defaults to the source selected in Power-up Source.
To display another source, you must manually select one by pressing the
Source button on the remote or keypad.
Power-up Source: determines which source the projector checks first for
active video during power-up.
Video Standard: when it is set to Auto, the projector attempts to automati-
cally pick the video standard based on the input signal it receives. (The
video standard options may vary depending on your region of the world.) If
the projector is unable to detect the correct standard, the colors may not
look right or the image may appear “torn.” If this happens, manually select
a video standard by selecting NTSC, PAL, or SECAM from the Video Stan
-
dard menu.
Closed Captions: (S-video and composite NTSC sources only) turns closed
captions on and off (if your source includes closed captions). By default,
when you mute the projector, captions are displayed. You can control
which captions (if any) should appear when muted or not muted by turning
mute on or off, then choosing this menu and selecting CC1 (closed caption
1, the most common channel), CC2, or Off.
Setup menu
To Next Page
Loading...
Need help?
General
Weight and Dimensions
