Page 28
Selecting a Source Using Total Touch Control
The "Return to Source" selection on the Home Screen displays the last source, which was selected.
To select a new source using touch control, rst ensure that Total Touch Control is enabled, then follow these steps:
Step Do This... Press Location Result
1 Tap the Arrow Bar at the
either side of the display,
to reveal the Total Touch
Control Menu Options.
The Total Touch Control Menu Icons
display.
2 Tap Source.
The Source Menu Options display.
3 Tap the source icon that
shows the port, that
is connected to your
desired source .
Any
source
icon
The source you selected is connected.
Note: For a list of source
denitions, see "Working with Total
Touch Control Advanced Functions
Menu" on page 32.
Note: If you want to connect to PC, select a source which is attached to the PC. Select OPS as the source, for a PC in the bay on the
back of the panel. For connecting to an external PC, see "Connecting the Display to an External PC" on page 20.
To Next Page
Loading...
