Page 42
Step Do this... Tap or Press Location Result
2 Choose a setting to adjust:
• Low Pitch
• High Pitch
• Balance
• SPDIF Output
(Digital Audio Signal)
Raw Audio Data
PCM - Encoded Audio
Data
Use the navigation buttons
on your remote to navigate to
your selection and press OK.
Note: "Understanding
On Screen Display Menu
Selections" on page 34.
Low Pitch, High Pitch and
Balance:
Your selection highlights.
A sliding scale with bar-line
appears on your chosen setting.
SPDIF Output:
Your selection highlights.
Use the panel buttons, to
navigate to your selection, then
touch it.
Touch your selection.
3 Low Pitch, High Pitch and
Balance:
Touch the bar-line, and drag
it to the left to decrease and
right to increase your chosen
adjustment.
Your adjustment is implemented.
SPDIF Output:
Tap the SPDIF selection until it
toggles to your choice of PCM
or Raw
To Next Page
Loading...
