20
Using the Projector
The projector is equipped with a self-locking, quick-release eleva-
tor foot and button.
To raise the projector:
1 Press and hold the elevator button (Figure 14).
2 Raise the projector to the height you want, then release the
button to lock the elevator foot into position.
F
IGURE
14
Adjusting the height of the projector
3 If necessary, turn the leveling knob to adjust the angle of the
projected image.
F
IGURE
15
Turning the leveling knob
elevator button
elevator foot
(under finger)
To Next Page
Loading...
