IN3144_IN3146_IN3148HD User’s Manual
— 41 —
5. Type the Telnet command in the following format:
telnet ttt.xxx.yyy.zzz 23 (“Enter” key pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
6. When the Telnet connection is ready and you have input an RS232 command, press Enter.
Enabling Telnet in Windows 7/8/10
1. Telnet is not included by default in Windows 7, 8 or 10.
2. Open the Control Panel.
3. Open Programs.
To Next Page
Loading...
