InFocus X6 - Page 20

19
... English
User Controls
Frequence
“Frequence” changes the display data frequency to match the fre-
quencyofyourcomputer’sgraphiccard.Ifyouexperienceavertical
ickeringbar,usethisfunctiontomakeanadjustment.
Tracking
Synchronize the signal timing of the projector with the graphics
card.Ifyouexperienceanunstableorickeringimage,usethis
function to correct it.
White Peaking
Use the white peaking control to set the white peaking level of
DMDchip.0standsforminimalpeaking,and10standsformaxi-
mumpeaking.Ifyoupreferastrongerimage,adjusttowardsthe
maximumsetting.Forasmoothandmorenaturalimage,adjust
towards the minimum setting.
Color Temp.
Adjustthecolortemperature.Athighertemperature,thescreen
lookscolder;atlowertemperature,thescreenlookswarmer.
Degamma
Thisallowsyoutochooseadegammatablethathasbeenne-tuned
to bring out the best image quality for the input.