InFocus X6 - Default Setting

24
English ...
User Controls
Source Lock
Whenthisfunctionisturned“Off”,theprojectorwillsearchfor
other signals if the current input signal is lost. When this function is
turned“On”,itwillsearchspeciedconnectionport.
Fan Control
Choose “On” to turn on Fan Control mode. Operate the fan at full
speed continuously to allow for proper high altitude cooling of the
projector.
Lamp Reminding
Choose this function to show or to hide the warning message when
the changing lamp message is displayed. The message will show up
30hoursbeforeendoflife.
Brilliant Colour
TM
 Choose“On”toprovidetrue,morevibrantcolorsinpicture.
Auto Power Off
Settheintervalofpower-offofthesystem,ifthereisnosignal
input. (In minutes)
Default Setting