InFocus X6 - Replacing the Lamp

33
... English
Appendices
Replacing the lamp

The projector will detect the lamp life itself. It will show
you a warning message

Only InFocus lamps are tested with this projector. Use of
otherlampsmaycauseelectricalshockandre.

Beextremelycarefulwhenremovingthelamphousing.In
theunlikelyeventthatthebulbruptures,smallglassfrag-
ments may be generated. The lamp housing is designed
tocontainthesefragments,butusecautionwhenremov-
ingthelamphousing.Beforereplacingthelamp,clean
the lamp compartment and dispose of cleaning materials.
Wash hands after lamp replacement.

Hg - Lamp contains mercury. Manage in accordance with
local disposal laws. See www.lamprecycle.org.

Whenyouseethismessage,changethelampassoonas
possible. Make sure the projector has been cooled down for
atleast60minutesbeforechangingthelamp.
Warning