EasyManua.ls Logo

Infortrend S12 Series - Power Supply

Infortrend S12 Series
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EonStor / EonStor DS S12/S16/S24 Series
171
Power Supply
S12 and S16 Series
Dual controller model:
100VAC @ 10A
240VAC @ 5A with PFC (auto-switching)
Input Voltage
Single controller model:
100VAC @ 6A
240VAC @ 3A with PFC (auto-switching)
Frequency 47 to 63Hz
Dual controller model: 530W; idle: 345W; Busy: 367W
Power Consumption
Single controller model: 350W; idle: 261.9W; Busy: 284.8W
DC Output 12.0V: 28A (Max.)
5.0V: 43A (Max.)
Input Frequency 47 to 63Hz
AC Input 100VAC @ 10A or 240VAC @ 5A with PFC
Power Factor Correction Yes
Hold-up Time At least 16ms at 115/230VAC full load after a loss of AC input
I C Through backplane to controll
2
er
Over-temperat e
Protection
Auto shutdown when lost cooling or exceeded ambient temperature;
over-voltage protection is also
ur
available.
PSU specifications described above may not represent all models. For details,
please refer to specific model specifications
.
S12F-R/S2840N and S12S-J2000R/S-N DC PSU
Minimum Nominal Maximum Inrush current
Input Voltage Range (Vdc) -36V -48V -72V
Current 22A 16A 11A
25A @ 10ms
60A @ 1ms
DC Output
12.0V: 43A (Max.); 0A(Min.)
5.0V: 28A (Max.); 0A(Min.)
Note: Total DC output power must
not exceed 530W; 5V peak is 35A
and when reached, the sustained
peak duration must be kept within
60 seconds.
I
2
C Through backplane to controller
Over-temperature
Protection
Auto shutdown when lost cooling or exceeded ambient temperature;
over-voltage protection is also available.
174

Table of Contents

Related product manuals