Infortrend S12 Series - Page 198

IFT-9272CSlide28/36-0030 Slide Rail Kit
5
. Attach the inner brackets (01) to the sides of the subsystem chassis using five #6-32 x
6mm flat head screws (08) for each inner bracket. The inner brackets will protrude
75mm from the rear end of the chassis.
01
08
Att
aching inner brackets
6. Gently lift the subsystem so that the inner brackets (01) on the chassis can be inserted
into the slide brackets (04). K sides and gently push the
subsystem into the rack.
eep pressure even on both
01
04
Inner bracket meeting slide rail
198