Page 14
12. Setting the Referral Password
Function 23 will allow you to set and change the Referral Password.
INCORRECT REFERRAL
PASSWORD
Press CLEAR to retry.
NUM TRIES EXCEEDED
Please call Help Desk
on: nnnn nnn nnnnnnn
Press CLEAR
Enter Referral Password
LAST TRY
and then press ENTER
At the READY prompt, press the MENU button twice. Use
the arrow buttons to view the available options and press
the GREEN button when the SELECT FUNCTION option is
highlighted.
Enter the number 23 and then press the GREEN button, the
terminal will ask you to swipe the Supervisor card or key in
your Supervisor code.
Now press the GREEN button to select the option to Set the
Referral Password.
SYSTEM MENU
Totals
Print Function Codes
Select Function
EFT
Set Referral Password?
Enter=YES Clear=NO
Enter Current
Referral Password?
and then press ENTER
Enter New
Referral Password?
and then press ENTER
Conrm New
Referral Password?
and then press ENTER
Incorrect Code/Password
If you enter an incorrect Password this screen will be
displayed, press the YELLOW button to retry.
If an incorrect Password is entered at the second attempt
this screen will be displayed, press the GREEN button for a
final retry.
Once the number of tries has been exceeded the terminal
will cancel the transaction, print ‘Cancelled’ receipts and
return to the READY prompt.
You will have to contact the helpdesk to reset password.
Pressing the YELLOW button will return the terminal to the READY prompt.
If this is the first time the Password has been set please enter 0000 and then press the GREEN button.
If the code is to be changed, key the current code and then
press the GREEN button.
Enter a new Referral Password and then press the GREEN
button.
Re-key the new Referral Password to confirm and then press
the GREEN button.
The terminal will print a receipt to confirm the Password has
been changed and will return to the READY prompt.