Ingenico EFT930G User Manual

Page 22
9. You may be asked to key in the amount of the
transaction and press the GREEN button.
IF YOUR TERMINAL IS CONFIGURED FOR CSC/AVS
(A CARDHOLDER VERIFICATION SERVICE) PROCEED AS
FOLLOWS.
If you see this prompt, key in the 3 digit security code,
which can be found on the signature strip on the back of the
customer’s card. Now press the GREEN button.
Please note: The security code for American Express cards is a four digit code and can be found on the
front of the card.
The terminal will display the results of the address check. The result will be printed on the merchant
receipt.
The security message will advise the response for any information entered at the Security Code,
Address and Post Code prompts.
<transaction type>
Key in Amount:
0.00
and then press ENTER
SALE
Signature OK?
ENTER=YES Clear=NO
<transaction type>
Key in Numerics from
The Post Code:
and then press ENTER
<transaction type>
Key in rst ve digits
of the address:
and then press ENTER
<transaction type>
AUTH CODE: nnnnn
<Aquirer name>
press ENTER
<transaction type>
Key in Security Code:
and then press ENTER
6. Key in the amount of the transaction and press the GREEN
ENTER button. The terminal will now dial for authorisation.
The authorisation code will be displayed. Press the GREEN
button.
NOTE: Not displayed if amount is keyed in first.
7. A receipt will now be printed. Obtain the customer’s
signature. If the signature is OK, press the GREEN button. If it
is not, press the YELLOW button and the transaction will be
voided.
8. The signed receipt should be kept for your records. The
terminal will now print a receipt for the customer. Pass the
receipt to the customer and the transaction is complete.
Your terminal may then prompt you to do the following:
• Enter the numeric digits from the customer s Post Code,
(i.e EH11 9YE would be entered 119) and then press
the GREEN button.
• Enter the customer’s house number, ( i.e Flat 5, 29 High
Street would be entered 529) and then press the GREEN
button.
• 10. The terminal will now dial out for authorisation
and the authorisation code will be displayed. Press the
GREEN button.

Ingenico EFT930G Specifications

General

Brand	Ingenico
Model	EFT930G
Category	Payment Terminal
Language	English