8
Text Data Entry
When performing data entry into text-only fields, the terminal keypad
defaults to all alpha characters.
Alphanumeric Data Entry
NOTE:
When performing data entry on the screens that
accept both alpha and numeric characters, use a
shift key [F] to access the alpha and special
characters throughout. By pressing the numeric
key first and then pressing the [F] key, you can
scroll through all characters programmed on that
key.
The admin key is also designated for other special characters and is
marked with a period (.), comma (,), pound sign (#) and asterisk (*):
[.,#*]. To select one of these special characters, press that key and
then press the [F] key until the desired character appears.
An alphanumeric data entry example is shown below:
Amount
[]
Footer 1 is an optional alphanumeric data item from zero to 24
characters. The following example shows how to enter the message
“Open 24HR” using multiple key strokes.
1
[]
To Next Page
Loading...
Need help?
General
