7_5_2 iSMP Power Requirements
The iSMP may be charged through the cradle accessory, or via the Multi-plug micro-USB cable. The device features a 1200mAh
battery which supports up to 800 card transactions and 66 hours in standby mode.
7_5_3 iSMP SAM and Micro SD Card Slots
There are no provisions for Secure Access Modules in the iSMP.
7_5_4 iSMP Interface Options
Interface options include Bluetooth class III and micro-USB AB slave for software upgrading or for charging for integration with
iPod Touch. Refer to the below image which shows the USB cable connection.
To Next Page
Loading...
Need help?
General
