Intégration Guide_iUC150&iUC180 17/70 Copyright © 2012 Ingenico
900009816 R11 000 01/1223 All rights reserved
1.3.1.2.9 Wake-Up Jack
This connector is used for Wake-up mechanism.
Pin N° Function
1 GND
2
HZ Stand-by authorized
“0” Wake-up / Stand-by unauthorized
The specific jack and cable is a spare part, contact commercial service to purchase it.
1.3.1.2.10 Bluetooth (optional)
When the iUC180 contactless reader is ordered with Bluetooth option, it must
be connected to an external Bluetooth antenna.
Ingenico can provide an antenna, or a standard one can be used. This standard
Antenna must have an impedance of 50 Ohm and a maximum gain of 0 dBi.
Ingenico recommended antennas:
Antenna
type
manufacturer model gain impedance Minimum
cable
length
Ingenico
Reference
To Next Page
Loading...
