©2008 Ingersoll Rand Company Page 48
Factory Setup Menu (P04)
To allow access into this
section of the controller, the
technician must enter the code
1954 into the pass code
screen. The screens within this
menu option are designed for
technician access only.
Running Hours Adjust
With this screen, the technician
is able to readjust the total
running hours on the
compressor. This screen is
used when a new controller is
being installed.
Loaded Hours Adjust
As the running hours adjust
screen, this screen will allow
the technician to change the
loaded hours on the
compressor. This function
comes in very handy when a
technician is replacing a
controller.
Maintenance Hours Reset
This screen allows the
technician to reset the
maintenance timer back to
To Next Page
Loading...
Need help?
General
