Programming the SmartLink-GP 43
Programming manual
3.11 Programming periodic events
Figure 14 - Programmable events table
You can program recurring events and pre-set events. The Events list
provides three programmable events: a periodic event (e.g. Send 'All's well'
Contact ID report) and two events with pre-set dates (e.g. Send SMS text or
voice message 'Maintenance' and/or SIM expiry reminders).
The programming of this window done is independent of all other
programming and it starts by selecting the Initialize button.
Parameter Description Note
Periodic event The periodic event will be
generated automatically in
accordance with the date and
time entered in the Date/
Time programming field. The
successive periodic events will
be generated in accordance
with the number of hours
entered in the Interval
programming field.
For example, to send
an 'All's well' Contact
ID report to the
central station.
SmartLink-GP must
be connected to a
computer in order to
implement this
operation.
Maintenance
event
SmartLink-GP will trid.gger
the Maintenance event in
accordance with the set date
and time.
For example, to send
SMS text
'Maintenance'
reminder to the
installer.
To Next Page
Loading...