INIM Electronics SmartLink-G - Appendix B Features Not Managed by the Smart-Link-G Model

Features not managed by the SmartLink-G model 59
Programming manual
Appendix B
Features not managed by the
SmartLink-G model
Features and settings not provided by the SmartLink-G model
Land line (PSTN)
interface
The device performs voice and/or digital
dialler and land-line (PSTN) answerphone
functions.
Tone check Checks for the dialing tone before dialing a
number
Pulse dialing Sets pulse dialing mode on the land line
(PSTN)
Land-line answerphone
and DTMF command
management
Answers land line (PSTN) calls and manages
a group of DTMF activated commands.
Access to DTMF menu
without code
Allows access to the DTMF command menu
without user code entry.
GSM priority Uses the GSM network during GSM Service
Available status. Switches to the land line
(PSTN) during No GSM Service status
Land line (PSTN) as GSM
network reserve line
You can use the land line (PSTN) as GSM
network reserve line.
Connecting the
SmartLogos60 board
The SmartLogos60 board provides all voice
features.
GSM network voice dialler Sends voice messages on the GSM network
in response to recognized events.
Land line (PSTN) voice
dialler
Sends voice messages on the PSTN network
in response to recognized events.
Call all voice numbers If a SmartLogos60 is installed, generates
calls to all the pre-set voice dialler numbers.
Control panel
Works as a control panel
Programming entry
parameters
Useful programming for the control panel
feature.
Delay Allows an entry/exit delay when the control
panel is in service.