Need help?Do you have a question about the Innovative Technology ITNS-500 and is the answer not in the manual?
Details the steps for installing the device driver using the installation CD.
Instructions for installing slide and negative films into their respective holders.
Steps for preparing and performing film and slide scans using the device.
Instructions for placing photos in the holder and initiating the photo scanning process.
Steps for using the business card fixture and scanning cards via the software.
Overview of the software interface, including modes and live view functionality.
Details how to use Mirror and Rotate functions for image correction.
Covers saving scanned images to the default location and deleting them.
Explains how to select a custom directory for saving scanned images.
Guide on launching calibration and understanding its different modes.
How to adjust position values, save settings, and use preview features.
Instructions for cleaning the backlight holder and business card fixture.
Solutions for problems encountered during the driver installation process.
Addresses error messages like "Cannot Install Hardware" and "Acquire Source Failed".
Procedures for removing existing drivers from the system.
Steps to uninstall drivers using the Device Manager tool.
Final step to reinstall the correct driver version after uninstallation.
Troubleshooting steps for issues like no preview image or device conflictions.
Solutions for transfer errors and ensuring the PC supports USB 2.0.
How to check for a USB 2.0 controller in Device Manager for compatibility.
General| Interface | USB 2.0 |
|---|---|
| Optical Resolution | 600 x 600 DPI |
| Interface Version | USB 2.0 |
| Scan Resolution | 600 dpi |
| Color Depth | 24 bit |
| Paper Size | A4 |
| Scanning Technology | CIS (Contact Image Sensor) |
| Maximum Document Size | 216 mm (width) |
| Compatibility | Windows, Mac |
To Next Page
