Innovative Technology NV9 USB - Frequently Asked Questions

NV9 USB Manual Set – Section 1 15
Copyright © Innovative Technology Ltd 2012 GA550-2
1.10 Frequently Asked Questions
a. Why are there no DIP switches on the unit?
 The NV9 USB has no dipswitches. Configuring the unit is carried out using a
configuration button mounted on top of the unit – see subsection 1.3 of this
manual for more information.
b. In what orientation can I use the NV9 USB validator?
 The NV9 USB can be mounted horizontally or vertically, depending on the type
of bezel and cashbox selected. See subsection 1.1 of this manual for more
information on mounting the validator – check the ITL website to see the
currently available range of cashboxes and bezels.
c. How do I check which interface has been set?
 You can check which interface has been selected by using the configuration
button mounted on top of the unit – see subsection 1.3 of this manual for more
information.
d. How do I change the interface type?
 You can change the interface type by using the configuration button mounted
on top of the unit – see subsection 1.4 of this manual for more information.
e. Some or all notes are not accepted
 Check that no inhibits are set in the Validator Manager software (see Section 3
of this manual set). If the problem persists, contact ITL Support for further
assistance.