Innovative Technology NV9 USB - Frequently Asked Questions

NV9 USB Manual Set – Section 2 13
Copyright © Innovative Technology Ltd 2012 GA550-2
2.5 Frequently Asked Questions
a. Why are there no DIP switches on the unit?
 The NV9 USB has no dipswitches. Configuring the unit is carried out using a
configuration button mounted on top of the unit – see Section 1, subsection 1.3
of this manual set for more information.
b. In what orientation can I use the NV9 USB validator?
 The NV9 USB can be mounted horizontally or vertically, depending on the type
of bezel and cashbox selected. See Section 1, subsection 1.1 of this manual for
more information on mounting the validator – check the ITL website to see the
currently available range of cashboxes and bezels.
c. Some or all notes are not accepted
 Check that no inhibits are set in the Validator Manager software (see Section 3
of this manual set). If the problem persists, contact ITL Support for further
assistance.
d. How do I clean the validator?
 Follow the instructions given in subsection 2.1 of this manual.