Innovative Technology NV9 USB - Page 7

NV9 USB Manual Set - Introduction 6
Copyright © Innovative Technology Ltd 2013 GA00550-2
STRUCTURE OF THIS MANUAL SET
This manual set is made up of seven sections, each is supplied in a separate Portable
Document Format (PDF) file, so you only need to download or print the section
relevant to your requirements:
 Introduction
 Section 1 – Quick Start and Configuration Guide
 Section 2 – Field Service Manual
 Section 3 – ITL Software Support Guide
 Section 4 – Mechanical and Electrical Manual
 Section 5 – Software Implementation Guide
 Section 6 – Technical Appendices
WHICH SECTION IS RELEVANT TO ME?
 Quick Start and Configuration Guide:
– Most users should use this section; typical users are software engineers
looking at how to make it work, project engineers evaluating their first
unit, or installation engineers installing the unit into a host machine.
– This section contains the essential information that a user needs to
quickly assemble and configure the NV9 USB validator ready for
installation into the host machine.
 Field Service Manual:
– Typically used by a field service engineer who is maintaining the
product.
– This section contains the essential information that the field service
engineer needs to clean, maintain and fault find an NV9 USB validator
that is installed in a host machine.
 ITL Software Support Guide:
– Any user who wants to test the functionality of the unit, reprogram the
firmware or dataset, or set up the encryption key, address or routing for
the unit.
– This section contains the information needed for a user to configure and
program the NV9 USB validator, using a range of software tools.