‑18‑
Item Specification
High‑speed
I/O
Pulse input
8‑channel hardware inputs
Maximum input frequency: 200 kHz
Supports up to 4 encoder axes
Supports A/B phase, pulse/direction, CW/CCW, single‑phase
pulse signal
Pulse output
8‑channel hardware outputs
Output frequency: 5 Hz to 200 kHz
Supports up to 4 pulse axes, which share motion control
instructions with the bus axis
Supports A/B phase, pulse/direction, CW/CCW, single‑phase
pulse signal
PWM supported
User
program
upgrade
Ethernet Supports PLC monitoring and user program uploading or
downloading via Ethernet interface
TF card Supports user program uploading or downloading via GE20‑
TF card
Type‑C Supports PLC monitoring and user program uploading or
downloading via Type‑C interface
Firmware
upgrade
Ethernet Supports firmware upgrade via Ethernet interface
TF card Supports firmware upgrade via GE20‑TF storage expansion
card
FPGA upgrade FPGA is upgraded together with MCU firmware
Dimen‑
sions and
weight
Dimensions (W
x H x D)
53mm × 100 mm × 80mm
Weight Approx. 184g
IP rating IP20
To Next Page
Loading...
