‑28‑
2.5 Installation Method
The PLC is mounted onto a DIN rail in conformity with IEC 60715 (width: 35 mm,
thickness: 1 mm). The dimensions (unit: mm) are shown below.
When installed on a DIN rail other than the recommended one (especially the one
whose thickness is not 1.0 mm), the product will not fit in place as the mounting hook
does not work.
■ Installing the PLC
1. Align the PLC with the DIN rail and push it in the direction indicated by the arrow
until you hear a click,
2. Make sure the DIN rail mounting hook of the PLC is locked. The locked and
unlocked states of the mounting hook are shown below.
To Next Page
Loading...
