‑35‑
4 Communication Wiring
4.1 Communication Networking
This PLC can connect to other PLCs, ERP, MES and other systems through Ethernet
ports, and can connect to products such as H5U, SV630C, IR311 series robots through
GE20 series expansion cards that provide RS485 or RS232 communication, as shown
below.
4.2 Cable Selection
The cable lug and cable diameter included in the following table are only for
reference.
Material
Name
Applicable Cross Sectional
Area of the Cable
KST Suzhou Yuanli
mm
2
AWG Model Crimping
Tool
Model Crimping
Tool
Tubular
lug
0.3 22 E0308 KST2000L 0308 YAC‑5
0.5 20 E0508 0508
0.75 18 E7508 7508
1.0 18 E1008 1008
1.5 16 E1508 1508
To Next Page
Loading...
