‑36‑
If you use other types of tubular lug, crimp the lug to the cables according to the
shape and dimension requirements shown in the figure below.
4.3 Cable Connection
■ RS485 communication
The RS485 communication port and power supply port share the same terminal
block, with RS485 communication port on the left and 24 V power supply port on the
right.
● Terminal definition
Description Left Terminal Right Terminal Description
RS485 differential
pair (+)
485+ +24V 24 VDC (+)
RS485 differential
pair (‑)
485‑ 0V 24 VDC (‑)
RS485 ground GND
PE
● Wiring
Select tubular cables referring to "
4.2 Cable Selection
"
on page 35
and insert the
cables into the communication ports.
To Next Page
Loading...
