- 140 -
LED stop display
parameter
Factory default
value
1139
F7-05
Setup
range：
1 ~ 65535
Meanings of lower eight digits:
If the above parameters need to be displayed
during the stop, set the corresponding positions to
1, and change the binary numbers into decimal
numbers and set them in F7-05.
Load speed display
coefficient
Factory default
value
1.0000
F7-06
Setup
range
0.0001~
6.5000
The output frequency of the
driver and the load speed
are relative through this
parameter. It is set when
the load speed needs to be
displayed.
Radiator temperature of
driver module
Factory default
value
F7-07
Setup
range
0.0 ~ ℃
100.0℃
Display the temperature of
driver module IGBT, and
the over temperature
protection value of the
driver module IGBT varies
with the model.
To Next Page
Loading...
