- 4 -
z Whether all the external fittings are connected correctly in accordance
with the circuit provided in this manual. Otherwise accident may
occur!
1.1.5 Upon Power-on:
z Do not open the cover of the servo driver upon power-on. Otherwise
there will be danger of electric shock!
z Do not touch the servo driver and its surrounding circuit with wet hand.
Otherwise there will be danger of electric shock!
z Do not touch the servo driver terminals (including control terminal).
Otherwise there will be danger of electric shock!
z At power-on, the servo driver r will perform the security check of the
external heavy-current circuit automatically. Thus, at this time please
do not touch the terminals U, V and W, or the terminals of motor,
otherwise there will be danger of electric shock.
z If parameter identification is required, please pay addtation to the danger
of injury arising from the rotating motor. Otherwise accident may occur!
z Do not change the factory settings at will. Otherwise it may damage the
equipment!
1.1.6 During the operation:
z Do not approach the mechanical equipment when selecting the restart
function. Otherwise it may cause injury!
z Do not touch the fan or discharge resistor to sense the temperature.
Otherwise, you may get burnt!
z 3. Detection of signals during the operation shall only be conducted by
qualified technician. Otherwise, personal injury or equipment damage
may be caused!
To Next Page
Loading...
Need help?
General
