Inovance MD021 - Group F3: Communication Parameters

MD021 Plastic Wire Drawing Machine User Manual
2
Reverse run
(REV)
DIs are used to control forward
running and reverse running
instructed by the inverter. The
inverter instructs forward running
when only the DI with the forward
running function is on. The inverter
instructs reverse running when only
the DI with the reverse running
function is on. The inverter stops
when both the DI with the forward
running function and the DI with the
reverse running function are on.
3
Fault reset
(RESET)
When the DI with this function is on,
the inverter can be reset after a fault
occurs.
4
External fault
input
External fault signals can be input by
means of the DIs, so that the inverter
can implement fault monitoring on
external devices. After the DI
receives a fault signal, the inverter
stops and reports Err15.