MD021 Plastic Wire Drawing Machine User Manual
Preface
Thank you for purchasing MD021 inverter. The MD021 inverter is
specially designed for wire drawing machine which has high
requirements on installation, commissioning and reliability. In
addition, it can be used as a general purpose inverter when special
functions for wire drawing machine are shielded.
This manual is a guide to the operations of MD021 series inverter.
Please read this manual carefully before performing operations and
keep it properly for future use.
Unpacking and Inspection
Check that the following requirements are met after unpacking the
box:
1) The box contains the equipment and user manual. (operation panel
and operation panel wire are optional parts additional to the standard
configuration).
2) The equipment is packed using a plastic bag. The plastic parts are
intact without damage.
3) The model on the nameplate is the same as your order.
To Next Page
Loading...