MD021 Plastic Wire Drawing Machine User Manual
away from flammable substances. Otherwise, it may cause
fire.
When more than two inverters are to be installed in
one cabinet, pay attention to the installation locations
(refer to Chapter 3 "Mechanical and Electrical
Installation") to ensure the cooling effect.
Do not drop the lead wire stub or screw into the
inverter. Otherwise, it may damage the inverter.
Correctly connect the input power wires (L, N),
ground wire (PE), and output wires (U, V and W).
Otherwise, it may damage the inverter.
Ensure that the wiring meets the EMC requirements
and the local safety standard. The wire size shall be
determined according to the manual. Otherwise,
accident may occur.
1.2 Precautions for Running
1. Maintenance and repair shall be performed by the professional
engineering technician; otherwise there will be personal injury or
To Next Page
Loading...