MD021 Plastic Wire Drawing Machine User Manual
Chapter 3 Mechanical and Electric
Installation
3.1 Mechanical Installation
3.1.1 Installation Environment
1) Ensure that the environment is free from direct sunlight, high
humidity and condensation.
2) Install the inverter in the upright direction. If an inverter needs to be
installed above another inverter, install an insulation guide plate to
prevent the lower inverter from heating the upper inverter.
3) Ensure that the installation support are incombustible materials.
Reserve sufficient heat dissipation room if the inverter is installed in a
sealed environment.
3.2 Operation Panel and Wiring
To Next Page
Loading...