‑12‑
Fundamental Safety Instructions
Disposal
● Dispose of retired equipment in accordance with local regulations and standards.
Failure to comply may result in property damage, personal injuries, or even death.
● Recycle retired equipment by observing industry waste disposal standards to avoid
environmental pollution.
Safety Labels
For safe equipment operation and maintenance, comply with the safety labels on the
equipment. Do not damage or remove the safety labels. See the following table for
descriptions of the safety labels.
Safety Signs Description
T1 to T12
models
● Read through the safety instructions before operating the
equipment. Failure to comply may result in equipment
damage, personal injuries, or even death.
● Do not touch terminals or remove the cover while the power
is on or within 10 minutes after the power is turned off.
Failure to comply may result in an electric shock.
T13
models
● Read through the safety instructions before operating the
equipment. Failure to comply may result in equipment
damage, personal injuries, or even death.
● Do not touch terminals or remove the cover while the power
is on or within 15 minutes after the power is turned off.
Failure to comply may result in an electric shock.
To Next Page
Loading...
