Inovance MD500-PLUS Series - Installing Extension Cards

Extension Cards
‑130‑
Card Model Function Remarks
MD38PGMD multi‑
function encoder card
MD38PGMD
Collector and differential encoder interface
card with an optional frequency
multiplication/division output interface;
Requires a 5 V/15 V power supply and
compatible with differential input, collector
input, and push‑pull input.
Supports differential output and collector
output and a variety of interfaces such as
encoder interfaces and host controller A/B
phase input interfaces.
Available for all models
23‑bit PG card ES510–PG‑CT1
Supports Inovance 23‑bit encoders and
provides a DB9 interface.
Available for all models
6.2 Installing Extension Cards
The AC drive is equipped with three I/O extension cards, one PC programmable card,
seven fieldbus cards (Modbus‑RTU, PROFIBUS‑DP, CANlink, CANopen, PROFINET,
EtherCAT, and Ethernet/IP) and two PG cards, as installed in the positions shown
below. Before installing these cards, remove the cover first.