Inovance MD500-PLUS Series - Options; List of Options

Options
‑42‑
5 Options
5.1 List of Options
Optional peripherals include braking units, function extension cards, and external
operating panels. For use of each option, see the corresponding user guide. If any
option is required, specify it in your order.
Table 5–1 List of options
Device Model Order No.
Supported
Models
Description
Braking
parts
External braking unit
[1]
MDBUN‑60‑T 01013133 All models
60 A, 380 VAC series
MDBUN‑60‑5T 0101AR57 All models
60 A, 480 VAC series
MDBUN‑90‑T 01013126 All models
90 A, 380 VAC series
MDBUN‑90‑5T 0101AR58 All models
90 A, 480 VAC series
MDBUN‑200‑T 01040104 All models
200 A, 380 VAC series
MDBUN‑200‑5T 01040160 All models
200 A, 480 VAC series
Built‑in braking unit
Models containing
letter "B"
/ T1 to T8 (75 kW)
Three‑phase 380 V to 480 V:
standard for T1 to T4
models and optional for T5
to T8 (75 kW) models
Extension
cards
I/O extension card 1
MD38IO1 01013098 T4 to T13
Adds five DIs, one RO, and
one DO, with Modbus/
CANlink.
I/O extension card 2
MD38IO2 01013103 All models Adds three DIs.
I/O extension card 3
MD38IO3 01040051 All models
Adds three DIs, one RS485
communication signal
isolation input, and one
normally open relay output.
RS485 communication
card
MD38TX1 01013112 All models
Provides the isolated
Modbus communication
adapter card.
CANlink
communication
extension card
MD38CAN1 01013100 All models
CANlink communication
adapter card
CANopen
communication
extension card
MD38CAN2 01013102 All models
CANopen communication
adapter card
PROFIBUS‑DP
communication card
MD‑SI‑DP 01040172 T1 to T3
PROFIBUS‑DP
communication card
MD38DP2 01013144 T4 to T13
PROFIBUS‑DP
communication card