Inovance MD500-PLUS Series - Page 44

Options
‑43‑
Device Model Order No.
Supported
Models
Description
Extension
cards
PROFINET
communication
extension card
MD500‑PN1 01040098 All models
PROFINET communication
adapter card
EtherCAT
communication
extension card
MD500‑ECAT 01040113 All models
EtherCAT communication
adapter card
Resolver interface card MD38PG4 01013081 All models
Applied to the resolver.
Excitation frequency: 10
kHz. DB9 interface.
To meet the MD38PG4
requirements, the excitation
input DC resistance of the
resolver must be greater
than 17 Ω. Failure to comply
may result in MD38PG4
exceptions. Use resolvers
with no more than four pole
pairs; failure to comply may
result in MD38PG4 overload.
MD38PGMD new multi‑
function encoder card
MD38PGMD 01013147 All models
Collector and differential
encoder interface card with
an optional frequency
multiplication/division
output interface
Applicable to 5 V/15 V power
supplies.
Compatible with differential
input, collector input, and
push‑pull input.
Supports differential output
and collector output and a
variety of interfaces such as
encoder interfaces and host
controller A/B phase input
interfaces.
23‑bit PG card ES510–PG‑CT1 01320007 All models
Supports Inovance 23‑bit
encoders and provides a
DB9 interface.