Inovance MD500-PLUS Series - Page 45

Options
‑44‑
Device Model Order No.
Supported
Models
Description
Mounting
accessories
Through‑hole
mounting bracket
MD500‑AZJ‑A1T1 01040072 T1
Satisfies requirements of
through‑hole mounting.
Applicable to T1 to T9
models only.
MD500‑AZJ‑A1T2 01040073 T2
MD500‑AZJ‑A1T3 01040074 T3
MD500‑AZJ‑A1T4 01040075 T4
MD500‑AZJ‑A1T5 01040001 T5
MD500‑AZJ‑A1T6 01040002 T6
MD500‑AZJ‑A1T7 01040003 T7
MD500‑AZJ‑A1T8 01040004 T8
MD500‑AZJ‑A1T9 01040005 T9
Grounding bracket of
cable shield
MD500‑AZJ‑A2T1 01040085 T1
Used for secondary fixing of
power cables and stable
grounding of the shield.
Applicable to T1 to T9
models only.
MD500‑AZJ‑A2T2 01040088 T2
MD500‑AZJ‑A2T3 01040083 T3
MD500‑AZJ‑A2T4 01040082 T4
MD500‑AZJ‑A2T5 01040081 T5
MD500‑AZJ‑A2T6 01040086 T6
MD500‑AZJ‑A2T7 01040087 T7
MD500‑AZJ‑A2T8 01040084 T8
MD500‑AZJ‑A2T9 01040089 T9
Guide rail MD500‑AZJ‑A3T10 01040009 T10 to T12
Used for installing the AC
drive in a cabinet. Guide rail
is recommended for
installing T10 models and
above in a cabinet.
Conduit box
MD500–NE
MA1–T1
01040108 T1 to T2
Models requiring UL Type 1
enclosure have a conduit
box. The conduit box is
optional and can be
purchased as needed
(applicable to T6 models
and below).
MD500–NE
MA1–T3
01040109 T3
MD500–NE
MA1–T4
01040110 T4
MD500–NE
MA1–T5
01040111 T5
MD500–NE
MA1–T6
01040112 T6
Cables
Main circuit cable
It is recommended to use Lugs from Suzhou Yuanli
Metal Enterprise Co., Ltd., see "
5.3.1 Main Circuit
Cable
" on page 63 .
It is recommended to use
symmetrical shielded cables
as power cables and I/O
cables in the main circuit.
Compared with quad‑cord
cable, symmetrical shielded
cable reduces
electromagnetic radiation in
the whole transmission
system.
Control circuit cable
All control circuit cables must be shielded cables. Use a separate shielded cable for
each type of analog signal. Shielded twisted pairs (STPs) are recommended as
digital signal cables.