Installation
‑63‑
Figure 5‑20 Mounting the guide rails on the cabinet
4. Remove the cover from the AC drive.
For details about how to remove the cover, see "Removing the Cover". Remove the
cover to access the auxiliary handle on the AC drive.
5. Align the casters of the AC drive with the guide rails and gently push the AC drive in‑
to the cabinet.
When pushing or pulling the AC drive, use an auxiliary strap to prevent it from
toppling. It is recommended that two persons cooperate to complete this job.
Figure 5‑21 Aligning the casters with the guide rails
To Next Page
Loading...
