Installation
‑64‑
Figure 5‑22 Pushing the AC drive into the cabinet
6. Remove the auxiliary strap, and drive screws into the four mounting holes on the
back of the AC drive to fasten the AC drive to the fixing beams in the cabinet.
Figure 5‑23 Fastening the AC drive to the fixing beams
7. Verify that the AC drive is securely installed, and remove the guide rails.
8. Remove the baffle from the top air filter of the AC drive. The baffle is used to pre‑
vent foreign objects, such as screws, from falling into the air filter during installation
of the AC drive.
To Next Page
Loading...
