Inovance Monarch MCTC-PEC-E1 - Troubleshooting; Fault Description and Codes

Chapter 4 Functional Parameters
-
41
-
Set parameters in group F0 as follows:
Parameter Name Setting Range Setting
F0-05
Handrail pulse time interval at
nominal speed
0.01–5.00 0.63
F0-06
Upper limit of phase A/B pulses for
step signals
- 18
F0-07
Lower limit of phase A/B pulses for
step signals
0 to F0-06 14
3） If the escalator does not have an auxiliary brake, set F0-08 to 2.
Parameter Name Setting Range Setting
F0-08 Auxiliary function selection 0–65535 2