Safety Instructions
-
4
-
Safety Instructions
Safety Disclaimer
1） Read and comply with the safety instructions during installation, operation, and mainte-
nance on the equipment.
2） To ensure the safety of humans and the products, follow the marks on the products and
all the safety instructions in this document.
3） The “CAUTION”, “WARNING”, and “DANGER” are only supplements to the
safety instructions.
4） Use this equipment based on the designated environment requirements. Damages
caused by improper usage are not covered by warranty.
5） The company shall take no responsibility of any personal injuries or Operation damag-
es caused by improper usage.
Safety Levels and Definitions
The“Danger” sign indicates that failure to comply with the notice will
result in server personal injuries or even death.
The“
Warning
” sign indicates that failure to comply with the notice may
result in server personal injuries or even death.
The“
Caution
” sign indicates that failure to comply with the notice may
result in minor or moderate personal injuries or damage to the equipment.
Safety Instructions
Unpacking
◆
Check whether the packing is intact and whether there is damage, water seepage, damp,
and deformation.
◆
Unpack the package following the package sequence. Do not hit the package with force.
◆
Check whether there are damages, rust, or injuries on the surface of the product or product
accessories.
◆
Check whether the number of packing materials is consistent with the packing list.
◆
Do not install the equipment if you find damages, corrosions, or indications of use on the
product or accessories.
◆
Do not install the equipment if you find water seepage, component missing or damage
upon unpacking.
◆
Do not install the equipment if you find the packing list does not conform to the equipment
you received.
To Next Page
Loading...
Need help?
General