Safety Instructions
-
5
-
Storage and Transportation
◆
Store this equipment based on the storage and transportation requirements on humidity
and temperature.
◆
Avoid transporting the equipment in environment such as water splashing, rain, direct sun-
light, high voltage, strong magnetic field, and strong vibration.
◆
Avoid storing the product for more than 3 months, long-term storage shall require stricter
protection and necessary inspections..
◆
Pack the product strictly before you transport. Use a sealed box for long-distance transpor-
tation.
◆
Never transport this product with products or materials that harm or have negative impacts
on this product.
◆
Use professional loading and unloading equipment to carry large-scale or heavy products.
◆
When carry this equipment with bear hand, hold the product casing firmly with care pre-
venting from parts falling, otherwise, it may result in personal jury or equipment damages.
◆
Handle the products with care, mind your steps, otherwise, it may result in personal juries
or equipment damages.
◆
Never stand or stay below the equipment when the equipment is lifted by hoisting equip-
ment.
Installation
◆
Read and comply with the safety instructions before performing installation.
◆
Do not modify this product.
◆
Do not rotate the product components or the fixed bolts and red marked bolts on product
components.
◆
Do not install this product in places where there is strong electric field or strong magnetic
field.
◆
When this product is installed in a cabinet or terminal device, the cabinet or terminal device
must be equipped with protective shell. The proof class must comply with relevant IEC
standards and local regulations.
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspec-
tion or parts replacement.
◆
The installation, wiring, maintenance, inspection and parts replacement are intended to be
performed by professional personnel only.
◆
Installation personnel must be familiar with product installation requirements and relevant
technical materials.
◆
If you need to install transformer or other strong electromagnetic interference equipment,
install shielding device at the same time to avoid product malfunction.
To Next Page
Loading...