Safety Instructions
-
7
-
◆
Prevent metal or other objects from falling into the device during operation, failure to com-
ply may result in equipment damage.
◆
Never use contactors to start or stop the equipment. Failure to comply may result in dam-
age to the equipment!
Maintenance
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspec-
tion or parts replacement.
◆
Never perform maintenance at power-on. Failure to comply may result in electric shock.
◆
Before maintenance, wait at least 10 minutes after power-off so that residual voltage can
discharge safely.
◆
Following the equipment repair and maintenance requirements to perform routine and
periodical inspection and maintenance, and keep a maintenance record.
Repair
◆
Do not allow non-professionals to perform product installation, wiring, maintenance, inspec-
tion or parts replacement.
◆
Never perform any inspection or maintenance operations at power-on. Failure to comply
may result in electric shock.
◆
Before inspection or maintenance, wait at least 10 minutes so that residual voltage can
discharge safely.
◆
Follow the terms defined in the warranty agreement to repair the product.
◆
When the equipment has a fault or is damaged, follow the instructions of the professionals
to perform troubleshooting or maintenance, and keep a maintenance record.
◆
Following the quick-wear parts instructions to replace the damaged parts.
◆
Do not continue to use the damaged equipment. Failure to comply may result in worse
damages.
◆
Following the equipment repair and maintenance requirements to perform routine and
periodical inspection and maintenance, and keep a maintenance record.
Disposal
◆
Following the local regulations or standards to dispose the retired equipment or products.
Failure to comply may result in Operation damage or even death.
◆
Following the industry waste disposal standards to recycle the scrapped equipment to
avoid environmental pollution.
To Next Page