Inseego Wavemaker FX3100 User Manual

5G INDOOR ROUTER FX3100 USER GUIDE 68
Port Forwarding Configuration
Port forwarding: To turn on port forwarding, move the ON/OFF slider to ON. To turn off port
forwarding, so that no inbound traffic is forwarded to a LAN client, move the slider to OFF.
Applications
Check the box next to each Port Forwarding application that you want to allow.
To forward all inbound WAN traffic on a specific port to a single LAN client, enter the IP address of the
target device in the Application IP address field.
The following table provides port numbers and protocol information for each port forwarding
application listed.
Application Name
Port
TCP
*
STCP
*
UDP
*
DNS
53
Yes
No
Yes
FTP control (command)
FTP data transfer
21
20
Yes
Yes
Yes
Yes
Assigned
Assigned
HTTP
HTTPS
80
443
Yes
Yes
Yes
Yes
Assigned
Assigned
NNTP
119
Yes
No
Assigned
POP3
POP3S
110
995
Yes
Yes
No
No
Assigned
Yes
SMTP
SecureSMTP
25
465
Yes
Yes
No
No
Assigned
No
SNMP
161
Assigned
No
Yes
Telnet
23
Yes
No
Assigned
TFTP
69
Assigned
No
Yes
*
Yes
indicates the protocol is standardized for the port number.
No
indicates the protocol is standardized for the port number.
Assigned
indicates the port number is assigned by IANA (Internet Assigned Numbers Authority) for protocol use but
may not be standardized.

Inseego Wavemaker FX3100 Specifications

General

Power	12V DC, 2A
Humidity	5% to 95% non-condensing
5G Bands	n2, n5, n66
4G LTE Bands	B2, B4, B5, B12, B13, B25, B26, B41, B48, B66
Wi-Fi	2.4GHz & 5GHz
SIM Card Slot	Nano SIM
Antenna	Internal antennas