13
Universal Rear Speaker Kit
www.insigniaproducts.com
1 Connect one end of the 3.5 mm audio cable (included) to the aux in jack
of the transmitter.
2 Connect the other end of the 3.5 mm audio cable into the audio output
ports on your audio source device, such as a tablet or mobile device.
OPTION 2:
1 Connect one end of the RCA cable (not included) on your audio source
device.
2 Connect the other ends of the RCA cable to the RCA to 3.5 mm adapter
(included), then connect the other end to the aux in jack of the
transmitter.
Output port :
OPTION 1
1 Connect one end of the 3.5 mm audio cable (included) to the aux out jack
of the transmitter.
2 Connect the other end of the 3.5 mm audio cable to the soundbar.
RCA to 3.5 mm
adapter (included)
RCA cable (not included)
Back of the transmitter
Audio source (TV,
Blu-ray, or cable box)
3.5 mm cable
(included)
Back of the transmitter
Sound bar
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 13 Tuesday, August 1, 2017 11:48 PM
To Next Page
Loading...
