17
Universal Rear Speaker Kit
www.insigniaproducts.com
Positioning the speakers
You can set the speakers on a flat surface or mount them on a wall. To
mount them on a wall, install a screw or nail for each speaker at the
position you want, then hang the speakers on the screw/nail.
Warning
Improper installation can result in serious injury or
damage to your speakers. If necessary, seek the
assistance of a professional.
Cautions
If you are installing screws into drywall or concrete,
use wall anchors designed for that type of surface.
Receiver
Transmitter
Sound source
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 17 Tuesday, August 1, 2017 11:48 PM
To Next Page
Loading...
