Insignia NS-HURSK18 - Step 5 - Connecting the receiver to the transmitter; Pairing your devices; Disconnecting your devices

16
NS-HURSK18
www.insigniaproducts.com
Step 5 - Connecting the receiver to the transmitter
Before you can use your speakers, you need to pair the transmitter to the
receiver.
Pairing your devices
1 Turn on the transmitter and receiver.
2 Press and hold the Pairing button on the back of the transmitter for three
seconds, then press and hold the Pairing button on the back of the
receiver. When paired, the LEDs light solid blue.
Disconnecting your devices
• Turn off the transmitter and receiver.
Note
Place the transmitter and receiver within 30 ft. (10 m) of each
other.
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 16 Tuesday, August 1, 2017 11:48 PM