7
Universal Rear Speaker Kit
www.insigniaproducts.com
Transmitter
# ITEM DESCRIPTION
1 Optical indicator LED Lights when using an optical (TV or DVD) sound source (default).
2 AUX indicator LED Lights when using an AUX (tablet or mobile device) sound source.
3 (power) button Press to turn on the transmitter. Press again to put the transmitter into standby
mode.
4 (source) button Press to toggle between the optical and aux sound sources.
5 - (volume down) Press (source) and - (volume down) to lower the rear speaker volume.
Press - (volume down) only to lower the master volume.
6 + (volume up) Press (source) and + (volume up) to raise the rear speaker volume.
Press + (volume up) only to raise the master volume.
7 Dolby indicator LED Lights when the audio has Dolby 5.1 content.
8 PCM indicator LED Lights solid when PCM audio is being received. Blinks when the format is not
supported (for example, DTS).
9 IR sensor Aim the remote control at this sensor to control the transmitter.
10 Power indicator - Solid Red when the transmitter is in standby mode.
- Blinks slowly when the transmitter is muted.
- Turns off when the transmitter is turned on.
- Blinks when adjusting volume. Blinks rapidly when the maximum or minimum
sound level is reached.
- Blinks when adjusting delay time. Blinks rapidly when the maximum or
minimum delay time level is reached.
11 DC IN jack Connect the 5V 1A AC adapter to this jack to power the transmitter.
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 7 Tuesday, August 1, 2017 11:48 PM
To Next Page
Loading...
