12
NS-HURSK18
www.insigniaproducts.com
Step 2 - Connecting the transmitter
Digital Optical connection (best)
Input port:
1 Connect one end of the digital optical cable (included) to the optical in
jack of the transmitter.
2 Connect the other end into the Digital Optical Output port on your audio
source device.
Output port:
1 Connect one end of the digital optical cable (included) to the optical out
jack of the transmitter.
2 Connect the other end to your soundbar.
3 Change the device's audio output to RAW format (typically found in audio
settings). Refer to the documentation that came with your audio source
device for more information.
AUX connection (good)
Input port:
OPTION 1:
Digital optical cable
(included)
Audio source (TV,
Blu-ray, or cable box)
Back of the transmitter
Sound bar
3.5 mm cable (included)
Audio source (tablet
or smartphone)
Back of the transmitter
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 12 Tuesday, August 1, 2017 11:48 PM
To Next Page
Loading...
