9
Universal Rear Speaker Kit
www.insigniaproducts.com
Remote control
#BUTTON DESCRIPTION
1 (Power) Press to turn on the speakers. Press again to put the speakers into standby mode.
2 SOURCE Press to select the OPTICAL or AUX sound source.
3 REAR Press + to increase the surround effect or - to decrease the surround effect.
4 DELAY Press + to increase the sound delay or - to decrease the sound delay. Use to synchronize
the rear surround speakers with a soundbar.
5 (Mute) Press to mute the sound from the speakers. Press again to restore the sound.
6 SOUND MODE Press to select the SURROUND or STEREO sound mode.
7 MASTER VOL +/– buttons Press to increase or decrease the volume of the speakers.
NS-HURSK18_17-0639_MAN_V2_ENG.fm Page 9 Tuesday, August 1, 2017 11:48 PM
To Next Page
Loading...
